{"title":"Bed Cages","description":null,"products":[{"product_id":"dirt-king-prefab-bedcage-1999-2018-chevrolet-silverado-1500-gmc-sierra-1500-dk-632828","title":"Dirt King Prefab Bed Cage | 1999–2018 Silverado\/Sierra 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and mounts to the frame after four brackets are welded on. It can be installed with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bed Cage is your best choice to increase rear suspension performance while not breaking the bank.\u003cbr\u003e\u003cbr\u003eNote:\u003c\/p\u003e\n\u003cp\u003eVehicles with a one-piece drive shaft will need to notch and reinforce the crossmember for proper drive shaft clearance at extension. Vehicles with a two-piece drive shaft do not need this modification.\u003c\/p\u003e\n\u003cp\u003eFor maximum up travel, the factory bump stop will need to be removed. \u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRecommend Leaf Pack: Deaver U182 (works with Deaver C85)\u003c\/li\u003e\n\u003cli\u003eRecommend Shocks: Fox or King (works with all shock manufactures)\u003c\/li\u003e\n\u003cli\u003eRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- works with 14\" shocks with extended rod ends\u003c\/li\u003e\n\u003cli\u003eRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.5\" shocks)\u003c\/li\u003e\n\u003cli\u003eBypass Tube Layout: Bypass tubes on front and back of shocks\u003c\/li\u003e\n\u003cli\u003eBed cage Shock Mounting Width: 1.5\"\u003c\/li\u003e\n\u003cli\u003eAxle Width: Requires 1.5\"-2\" wheel spacers or 1.5\"-2\" wider per side axle\u003c\/li\u003e\n\u003cli\u003eAccessory Mounting Hole Size: 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrefabbed bed cage structure\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAD designed \n\u003c\/li\u003e\n\u003cli\u003eBoxed plate and tube construction\u003c\/li\u003e\n\u003cli\u003e2\"x.120\" tubing\u003c\/li\u003e\n\u003cli\u003e1\/4\", 3\/16\", and 1\/8\" plate\u003c\/li\u003e\n\u003cli\u003eProfessionally MIG welded\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation instructions\u003c\/h2\u003e\n\n\u003cbr\u003e\n\u003ca href=\"https:\/\/dirtking.com\/pages\/dk-632828-instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\n View Installation Instructions\u003c\/a\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e1999-2018 Chevy Silverado 2WD \/ 4WD1999-2018 GMC Sierra 2WD \/ 4WD\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003e*99-06 models with 6.5' bed requires trimming a small section of the front hanger mounts and drilling two 5\/8\" holes in the frame.\u003cbr\u003e*Will not work on models with factory torsion bar front suspension.\u003cbr\u003e\u003c\/small\u003e\u003c\/p\u003e\u003cp\u003eShips directly from the supplier.\u003c\/p\u003e\u003ch2\u003ePart numbers and configurations\u003c\/h2\u003e\u003cdiv class=\"brp-product-specs\" style=\"max-width:100%;overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePowder Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eDK-632828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eDK-632828-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eDK-632828-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eDK-632828-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003csection data-brp-manufacturer-warranty=\"true\"\u003e\u003cdetails\u003e\u003csummary\u003eManufacturer Warranty\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003eDirt King warranty:\u003c\/strong\u003e Dirt King warrants its products against defects in materials and workmanship for the original purchaser under normal use and service, subject to its written terms and exclusions.\u003c\/p\u003e\n\u003cp\u003eBaja Racing Parts is the retailer. Manufacturer claims follow Dirt King’s warranty process. We can help identify the required information and start your claim.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/warranty-policy\"\u003eWarranty Policy\u003c\/a\u003e or email \u003ca href=\"mailto:sales@bajaracingparts.com\"\u003esales@bajaracingparts.com\u003c\/a\u003e for assistance.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Dirt King","offers":[{"title":"No Powder Coat","offer_id":67685930762483,"sku":"DK-632828","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black","offer_id":67810663235827,"sku":"DK-632828-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black","offer_id":67810663268595,"sku":"DK-632828-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":67810663301363,"sku":"DK-632828-GY","price":1820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/6908\/5683\/files\/DirtKing_Prefab_Bedcage_Main.jpg?v=1792557023"},{"product_id":"dirt-king-prefab-bedcage-2019-2025-chevrolet-silverado-1500-gmc-sierra-1500-dk-636828","title":"Dirt King Prefab Bed Cage | 2019–2026 Chevrolet Silverado 1500 \/ GMC Sierra 1500","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and mounts to the frame after four brackets are welded on. It can be installed with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bed Cage is your best choice to increase rear suspension performance while not breaking the bank.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRecommend Leaf Pack: Deaver R81\u003c\/li\u003e\n\u003cli\u003eRecommend Shocks: Fox or King (works with all shock manufactures)\u003c\/li\u003e\n\u003cli\u003eRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- Works with 14\" shocks with extended rod ends but will limit travel.\u003c\/li\u003e\n\u003cli\u003eRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.5\" shocks)\u003c\/li\u003e\n\u003cli\u003eBypass Tube Layout: Bypass tubes on front and back of shocks\u003c\/li\u003e\n\u003cli\u003eBed cage Shock Mounting Width: 1.5\"\u003c\/li\u003e\n\u003cli\u003eAxle Width: Requires 1.5\"-2\" wheel spacers or 1.5\"-2\" wider per side axle\u003c\/li\u003e\n\u003cli\u003eAccessory Mounting Hole Size: 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrefabbed bed cage structure\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAD designed \n\u003c\/li\u003e\n\u003cli\u003eBoxed plate and tube construction\u003c\/li\u003e\n\u003cli\u003e2\"x.120\" tubing\u003c\/li\u003e\n\u003cli\u003e1\/4\", 3\/16\", and 1\/8\" plate\u003c\/li\u003e\n\u003cli\u003eProfessionally MIG welded\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003eInstallation instructions\u003c\/h2\u003e\n\n\u003cbr\u003e\n\u003ca href=\"https:\/\/dirtking.com\/pages\/dk-636828-instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\n View Installation Instructions\u003c\/a\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e2019-2026 Chevy Silverado 1500 2WD \/ 4WD2019-2026 GMC Sierra 1500 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003eShips directly from the supplier.\u003c\/p\u003e\u003ch2\u003ePart numbers and configurations\u003c\/h2\u003e\u003cdiv class=\"brp-product-specs\" style=\"max-width:100%;overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePowder Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eDK-636828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eDK-636828-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eDK-636828-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eDK-636828-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003csection data-brp-manufacturer-warranty=\"true\"\u003e\u003cdetails\u003e\u003csummary\u003eManufacturer Warranty\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003eMfgr. Warranty:\u003c\/strong\u003e Terms vary by manufacturer and part\u003c\/p\u003e\n\u003cp\u003eA written warranty duration has not been verified for this specific part. Ask Baja Racing Parts for the applicable manufacturer terms before purchase.\u003c\/p\u003e\n\u003cp\u003eBaja Racing Parts is the retailer. Manufacturer claims follow the applicable warranty process. We can help identify the right contact and start your claim. Your legal rights remain applicable.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/warranty-policy\"\u003eWarranty Policy\u003c\/a\u003e or email \u003ca href=\"mailto:sales@bajaracingparts.com\"\u003esales@bajaracingparts.com\u003c\/a\u003e for assistance.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Dirt King","offers":[{"title":"No Powder Coat","offer_id":67685949374707,"sku":"DK-636828","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black","offer_id":67727987605747,"sku":"DK-636828-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black","offer_id":67727987638515,"sku":"DK-636828-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray","offer_id":67727987671283,"sku":"DK-636828-GY","price":1820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/6908\/5683\/files\/Dirt_King_Fabrication_silverado_1500_sierra_1500_bed_cage_fabricated_1400x_ef4d547f-05af-401f-8236-f0dc6676e5fc.jpg?v=1791534620"},{"product_id":"dirt-king-prefab-bedcage-2005-2023-toyota-tacoma-dk-811828","title":"Dirt King Prefab Bed Cage | 2005–2023 Toyota Tacoma","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and installs in the factory bed mounting locations. It is designed to be installed with Deaver leaf under springs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab bed cage is your best choice to increase rear suspension performance while not breaking the bank.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRecommend Deaver H70HD Leaf Springs\n\u003c\/li\u003e\n\u003cli\u003eRecommend Shocks: Fox or King (works with all shock manufactures)\u003c\/li\u003e\n\u003cli\u003eRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- works with 14\" shocks with extended rod ends\u003c\/li\u003e\n\u003cli\u003eRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.0\" shocks)\u003c\/li\u003e\n\u003cli\u003eBypass Tube Layout: Bypass tubes on front and back of shocks\u003c\/li\u003e\n\u003cli\u003eBed cage Shock Mounting Width: 1.5\"\u003c\/li\u003e\n\u003cli\u003eAxle Width: Requires 1.5\"-2\" wheel spacers or 1.5\"-2\" wider per side axle\u003c\/li\u003e\n\u003cli\u003eAccessory Mounting Hole Size: 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrefabbed bed cage structure\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLower shock mounts\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAD designed \n\u003c\/li\u003e\n\u003cli\u003eBoxed plate and tube construction\u003c\/li\u003e\n\u003cli\u003e2\"x.120\" DOM tubing\u003c\/li\u003e\n\u003cli\u003e1\/4\", 3\/16\", and 1\/8\" plate\u003c\/li\u003e\n\u003cli\u003eProfessionally MIG welded\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation instructions\u003c\/h2\u003e\n\n\u003cbr\u003e\n\u003ca href=\"https:\/\/dirtking.com\/pages\/dk-811828-instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\n View Installation Instructions\u003c\/a\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e2005-2023 Toyota Tacoma 2WD \/ 4WD\u003cbr\u003eWill also work on the 6.5 ft beds with Dirt King's custom brackets.\u003c\/p\u003e\u003cp\u003eShips directly from the supplier.\u003c\/p\u003e\u003ch2\u003ePart numbers and configurations\u003c\/h2\u003e\u003cdiv class=\"brp-product-specs\" style=\"max-width:100%;overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePowder Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBed Size\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eShort Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eLong Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eShort Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eLong Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828A-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eShort Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eLong Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828A-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eShort Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eLong Bed\u003c\/td\u003e\n\u003ctd\u003eDK-811828A-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003csection data-brp-manufacturer-warranty=\"true\"\u003e\u003cdetails\u003e\u003csummary\u003eManufacturer Warranty\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003eMfgr. Warranty:\u003c\/strong\u003e Terms vary by manufacturer and part\u003c\/p\u003e\n\u003cp\u003eA written warranty duration has not been verified for this specific part. Ask Baja Racing Parts for the applicable manufacturer terms before purchase.\u003c\/p\u003e\n\u003cp\u003eBaja Racing Parts is the retailer. Manufacturer claims follow the applicable warranty process. We can help identify the right contact and start your claim. Your legal rights remain applicable.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/warranty-policy\"\u003eWarranty Policy\u003c\/a\u003e or email \u003ca href=\"mailto:sales@bajaracingparts.com\"\u003esales@bajaracingparts.com\u003c\/a\u003e for assistance.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Dirt King","offers":[{"title":"No Powder Coat \/ Short Bed","offer_id":67685965037811,"sku":"DK-811828","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"No Powder Coat \/ Long Bed","offer_id":67727900147955,"sku":"DK-811828A","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ Short Bed","offer_id":67727900180723,"sku":"DK-811828-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ Long Bed","offer_id":67727900213491,"sku":"DK-811828A-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Short Bed","offer_id":67727900246259,"sku":"DK-811828-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Long Bed","offer_id":67727900279027,"sku":"DK-811828A-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ Short Bed","offer_id":67727900311795,"sku":"DK-811828-GY","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ Long Bed","offer_id":67727900344563,"sku":"DK-811828A-GY","price":1820.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/6908\/5683\/files\/Dirt_King_Fabrication_Toyota_Tacoma_bed_cage_best_paired_with_Deaver_leaf_springs_bump_stop_mounts_optional_1400x_5eac8a66-147e-42e3-8f39-bab51e96879f.jpg?v=1791534705"},{"product_id":"dirt-king-prefab-bedcage-2004-2014-ford-f-150-dk-922828","title":"Dirt King Prefab Bed Cage | 2004–2014 Ford F-150 \/ 2010–2014 Ford Raptor","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and mounts to the frame after four brackets are welded on. It can be installed with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bed Cage is your best choice to increase rear suspension performance while not breaking the bank.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRecommend Shocks: Fox or King (works with all shock manufactures)\u003c\/li\u003e\n\u003cli\u003eRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- works with 14\" shocks with extended rod ends\u003c\/li\u003e\n\u003cli\u003eRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.5\" shocks)\u003c\/li\u003e\n\u003cli\u003eBypass Tube Layout: Bypass tubes on front and back of shocks\u003c\/li\u003e\n\u003cli\u003eBed cage Shock Mounting Width: 1.5\"\u003c\/li\u003e\n\u003cli\u003eAxle Width: Requires 2\" wheel spacers or 2\" wider per side axle (Raptor axle doesn't require wheel spacers)\u003c\/li\u003e\n\u003cli\u003eAccessory Mounting Hole Size: 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrefabbed bed cage structure\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAD designed \n\u003c\/li\u003e\n\u003cli\u003eBoxed plate and tube construction\u003c\/li\u003e\n\u003cli\u003eBolt on application\u003c\/li\u003e\n\u003cli\u003e2\"x.120\" tubing\u003c\/li\u003e\n\u003cli\u003e1\/4\", 3\/16\", and 1\/8\" plate\u003c\/li\u003e\n\u003cli\u003eProfessionally MIG welded\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\n\u003ch2\u003eInstallation instructions\u003c\/h2\u003e\n\n\u003cbr\u003e\n\u003ca href=\"https:\/\/dirtking.com\/pages\/dk-922828-instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\n View Installation Instructions\u003c\/a\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e2004-2014 Ford F-150 2WD \/ 4WD2010-2014 Ford Raptor 4WD\u003c\/p\u003e\n\n\n\n*Returns or cancelations on powder coated bed cages are subject to a 10% restocking fee.\u003cp\u003eShips directly from the supplier.\u003c\/p\u003e\u003ch2\u003ePart numbers and configurations\u003c\/h2\u003e\u003cdiv class=\"brp-product-specs\" style=\"max-width:100%;overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePowder Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eShock Mounts\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eWith Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828 + DK-922847\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eWith Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828-BK + DK-922847\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eWith Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828-GBK + DK-922847\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eWith Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-922828-GY + DK-922847\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003csection data-brp-manufacturer-warranty=\"true\"\u003e\u003cdetails\u003e\u003csummary\u003eManufacturer Warranty\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003eMfgr. Warranty:\u003c\/strong\u003e Terms vary by manufacturer and part\u003c\/p\u003e\n\u003cp\u003eA written warranty duration has not been verified for this specific part. Ask Baja Racing Parts for the applicable manufacturer terms before purchase.\u003c\/p\u003e\n\u003cp\u003eBaja Racing Parts is the retailer. Manufacturer claims follow the applicable warranty process. We can help identify the right contact and start your claim. Your legal rights remain applicable.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/warranty-policy\"\u003eWarranty Policy\u003c\/a\u003e or email \u003ca href=\"mailto:sales@bajaracingparts.com\"\u003esales@bajaracingparts.com\u003c\/a\u003e for assistance.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Dirt King","offers":[{"title":"No Powder Coat \/ No Shock Mounts","offer_id":67685993054451,"sku":"DK-922828","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ No Shock Mounts","offer_id":67727834579187,"sku":"DK-922828-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ No Shock Mounts","offer_id":67727834611955,"sku":"DK-922828-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ No Shock Mounts","offer_id":67727834644723,"sku":"DK-922828-GY","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"No Powder Coat \/ With Shock Mounts","offer_id":67727834677491,"sku":"DK-922828 + DK-922847","price":1674.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ With Shock Mounts","offer_id":67727834710259,"sku":"DK-922828-BK + DK-922847","price":1874.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ With Shock Mounts","offer_id":67727834743027,"sku":"DK-922828-GBK + DK-922847","price":1899.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ With Shock Mounts","offer_id":67727834775795,"sku":"DK-922828-GY + DK-922847","price":1899.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/6908\/5683\/files\/Dirt_King_Fabrication_ford_f-150_raptor_fabricated_bed_cage_fox_or_king_shocks_1400x_f4db3368-41dd-4bfc-9a02-2078d0faa20d.jpg?v=1791534874"},{"product_id":"dirt-king-prefab-bedcage-2007-2021-toyota-tundra-dk-815828","title":"Dirt King Prefab Bedcage | 2007–2021 Toyota Tundra","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and installs in the factory bed mounting locations. It can be used with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve shocks properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bed Cage is your best choice to increase rear suspension performance while not breaking the bank.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRecommend Leaf Pack: Deaver I96\u003c\/li\u003e\n\u003cli\u003eRecommend Shocks: Fox or King (works with all shock manufactures)\u003c\/li\u003e\n\u003cli\u003eRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- works with 14\" shocks with extended rod ends\u003c\/li\u003e\n\u003cli\u003eRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.5\" shocks)\u003c\/li\u003e\n\u003cli\u003eBypass Tube Layout: Bypass tubes on front and back of shocks\u003c\/li\u003e\n\u003cli\u003eBed cage Shock Mounting Width: 1.5\"\u003c\/li\u003e\n\u003cli\u003eAxle Width: Requires 1.5\"-2\" wheel spacers or 1.5\"-2\" wider per side axle\u003c\/li\u003e\n\u003cli\u003eAccessory Mounting Hole Size: 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrefabbed bed cage structure\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAD designed \n\u003c\/li\u003e\n\u003cli\u003eBoxed plate and tube construction\u003c\/li\u003e\n\u003cli\u003e2\"x.120\" DOM tubing\u003c\/li\u003e\n\u003cli\u003e1\/4\", 3\/16\", and 1\/8\" plate\u003c\/li\u003e\n\u003cli\u003eProfessionally MIG welded\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation instructions\u003c\/h2\u003e\n\n\u003cbr\u003e\n\u003ca href=\"https:\/\/dirtking.com\/pages\/dk-815828-instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\n View Installation Instructions\u003c\/a\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e2007-2021 Toyota Tundra 2WD \/ 4WD\u003c\/p\u003e\u003cp\u003eShips directly from the supplier.\u003c\/p\u003e\u003ch2\u003ePart numbers and configurations\u003c\/h2\u003e\u003cdiv class=\"brp-product-specs\" style=\"max-width:100%;overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePowder Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eShock Mounts\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828 + DK-815849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828-BK + DK-815849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828-GBK + DK-815849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-815828-GY + DK-815849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003csection data-brp-manufacturer-warranty=\"true\"\u003e\u003cdetails\u003e\u003csummary\u003eManufacturer Warranty\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003eMfgr. Warranty:\u003c\/strong\u003e Terms vary by manufacturer and part\u003c\/p\u003e\n\u003cp\u003eA written warranty duration has not been verified for this specific part. Ask Baja Racing Parts for the applicable manufacturer terms before purchase.\u003c\/p\u003e\n\u003cp\u003eBaja Racing Parts is the retailer. Manufacturer claims follow the applicable warranty process. We can help identify the right contact and start your claim. Your legal rights remain applicable.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/warranty-policy\"\u003eWarranty Policy\u003c\/a\u003e or email \u003ca href=\"mailto:sales@bajaracingparts.com\"\u003esales@bajaracingparts.com\u003c\/a\u003e for assistance.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Dirt King","offers":[{"title":"No Powder Coat \/ No Shock Mounts","offer_id":67686139658483,"sku":"DK-815828","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"No Powder Coat \/ Include Shock Mounts","offer_id":67696760783091,"sku":"DK-815828 + DK-815849","price":1744.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ No Shock Mounts","offer_id":67696760815859,"sku":"DK-815828-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ Include Shock Mounts","offer_id":67696760848627,"sku":"DK-815828-BK + DK-815849","price":1944.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ No Shock Mounts","offer_id":67696760881395,"sku":"DK-815828-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Include Shock Mounts","offer_id":67696760914163,"sku":"DK-815828-GBK + DK-815849","price":1969.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ No Shock Mounts","offer_id":67696760946931,"sku":"DK-815828-GY","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ Include Shock Mounts","offer_id":67696760979699,"sku":"DK-815828-GY + DK-815849","price":1969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/6908\/5683\/files\/Dirt_King_Fabrication_toyota_tundra_bed_cage_deaver_springs_fox_or_king_bed_cage_shocks_prerunner_bedcage_800x_0c52c301-5944-49c5-8dca-75cb8b7d34e7.jpg?v=1791535751"},{"product_id":"dirt-king-prefab-bedcage-2015-2020-ford-f-150-dk-924828","title":"Dirt King Prefab Bedcage | 2015–2020 Ford F-150 \/ 2017–2020 Ford Raptor","description":"\u003ch2\u003eOverview\u003c\/h2\u003e\n\n\u003cp\u003eThe Dirt King Prefab Bed Cage was developed after building numerous custom bed cages. With that experience Dirt King has perfected the design for maximum travel and easy installation. The bed cage takes up minimal bed space while not compromising strength. Accessory mounting holes are incorporated into the center section of the cage to mount dust lights and flag whips. The entire kit bolts together and mounts to the vehicle using the factory bed bolts. It can be installed with leaf over or leaf under spring packs. This suspension system is superior to a cantilever suspension system for two major reasons. The first reason is the shock mounts on the bed cage are outside the frame rails vs inside the frame rails for increased stability. The second reason is the shocks are mounted vertically with a motion ratio close to 1:1 allowing for proper dampening through the suspension travel. The cantilever suspension has a higher motion ratio resulting in smaller shocks, difficult to valve properly, and heating up the shocks faster since they have less fluid. The Dirt King Prefab Bed Cage is your best choice to increase rear suspension performance while not breaking the bank.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eRecommend Leaf Pack: Deaver V115 (works with Deaver L84)\u003c\/li\u003e\n\u003cli\u003eRecommend Shocks: Fox or King (works with all shock manufactures)\u003c\/li\u003e\n\u003cli\u003eRecommend Shock Length: 16\" (26\" collapsed, 42\" extended)\u003cbr\u003e- works with 14\" shocks with extended rod ends\u003c\/li\u003e\n\u003cli\u003eRecommended Shock Diameter: 3.0\" (works with 2.5\"-3.5\" shocks)\u003c\/li\u003e\n\u003cli\u003eBypass Tube Layout: Bypass tubes on front and back of shocks\u003c\/li\u003e\n\u003cli\u003eBed cage Shock Mounting Width: 1.5\"\u003c\/li\u003e\n\u003cli\u003eAxle Width: Requires 2\" wheel spacers or 2\" wider per side axle (Raptor axle doesn't require wheel spacers)\u003c\/li\u003e\n\u003cli\u003eAccessory Mounting Hole Size: 1\/2\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eWhat's included\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003ePrefabbed bed cage structure\u003c\/li\u003e\n\u003cli\u003eGrade 8 mounting hardware\u003c\/li\u003e\n\u003cli\u003eInstallation instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eCAD designed \n\u003c\/li\u003e\n\u003cli\u003eBoxed plate and tube construction\u003c\/li\u003e\n\u003cli\u003eBolt on application\u003c\/li\u003e\n\u003cli\u003e2\"x.120\" tubing\u003c\/li\u003e\n\u003cli\u003e1\/4\", 3\/16\", and 1\/8\" plate\u003c\/li\u003e\n\u003cli\u003eProfessionally MIG welded\u003c\/li\u003e\n\u003cli\u003eProudly made in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation instructions\u003c\/h2\u003e\n\n\u003cbr\u003e\n\u003ca href=\"https:\/\/dirtking.com\/pages\/dk-924828-instructions\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\n View Installation Instructions\u003c\/a\u003e\n\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\n\u003cp\u003e2015-2020 Ford F-150 2WD \/ 4WD2017-2020 Ford Raptor 4WD\u003c\/p\u003e\n\u003cp\u003e*Long bed F150's will require the end user to fabricate custom mounts for the front mounting points of this bed cage.\u003c\/p\u003e\u003cp\u003eShips directly from the supplier.\u003c\/p\u003e\u003ch2\u003ePart numbers and configurations\u003c\/h2\u003e\u003cdiv class=\"brp-product-specs\" style=\"max-width:100%;overflow-x:auto\"\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth scope=\"col\"\u003ePower Coat\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eShock Mounts\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePart number\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNo Powder Coat\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828 + DK-924849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828-BK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSatin Black\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828-BK + DK-924849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828-GBK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGloss Black\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828-GBK + DK-924849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eNo Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828-GY\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGray\u003c\/td\u003e\n\u003ctd\u003eInclude Shock Mounts\u003c\/td\u003e\n\u003ctd\u003eDK-924828-GY + DK-924849\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003c\/div\u003e\u003csection data-brp-manufacturer-warranty=\"true\"\u003e\u003cdetails\u003e\u003csummary\u003eManufacturer Warranty\u003c\/summary\u003e\u003cp\u003e\u003cstrong\u003eMfgr. Warranty:\u003c\/strong\u003e Terms vary by manufacturer and part\u003c\/p\u003e\n\u003cp\u003eA written warranty duration has not been verified for this specific part. Ask Baja Racing Parts for the applicable manufacturer terms before purchase.\u003c\/p\u003e\n\u003cp\u003eBaja Racing Parts is the retailer. Manufacturer claims follow the applicable warranty process. We can help identify the right contact and start your claim. Your legal rights remain applicable.\u003c\/p\u003e\n\u003cp\u003eSee our \u003ca href=\"\/pages\/warranty-policy\"\u003eWarranty Policy\u003c\/a\u003e or email \u003ca href=\"mailto:sales@bajaracingparts.com\"\u003esales@bajaracingparts.com\u003c\/a\u003e for assistance.\u003c\/p\u003e\u003c\/details\u003e\u003c\/section\u003e","brand":"Dirt King","offers":[{"title":"No Powder Coat \/ No Shock Mounts","offer_id":67696731160819,"sku":"DK-924828","price":1595.0,"currency_code":"USD","in_stock":true},{"title":"No Powder Coat \/ Include Shock Mounts","offer_id":67696731193587,"sku":"DK-924828 + DK-924849","price":1744.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ No Shock Mounts","offer_id":67696731226355,"sku":"DK-924828-BK","price":1795.0,"currency_code":"USD","in_stock":true},{"title":"Satin Black \/ Include Shock Mounts","offer_id":67696731259123,"sku":"DK-924828-BK + DK-924849","price":1944.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ No Shock Mounts","offer_id":67696731291891,"sku":"DK-924828-GBK","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gloss Black \/ Include Shock Mounts","offer_id":67696731324659,"sku":"DK-924828-GBK + DK-924849","price":1969.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ No Shock Mounts","offer_id":67696731357427,"sku":"DK-924828-GY","price":1820.0,"currency_code":"USD","in_stock":true},{"title":"Gray \/ Include Shock Mounts","offer_id":67696731390195,"sku":"DK-924828-GY + DK-924849","price":1969.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0695\/6908\/5683\/files\/Dirt_King_Fabrication_ford_f-150_raptor_fabricated_bed_cage_fox_or_king_shocks_800x_76ff4057-4f30-47ee-8692-1dedada7e65a.jpg?v=1791535763"}],"url":"https:\/\/www.bajaracingparts.com\/collections\/bed-cages.oembed","provider":"Baja Racing Parts","version":"1.0","type":"link"}