4-Tire Air System Inflation Accessory Kit
4-Tire Air System Inflation Accessory Kit
Brand: Innovative AT Products
SKU:IJKP-32
Couldn't load pickup availability
Ships directly from the supplier.
Specifications
| Part number | IJKP-32 |
|---|
Compatibility
- For use with Innovative AT Products four-tire air systems.
Overview
Add inflation and blow-gun attachments to an Innovative AT Products four-tire air system. The kit connects in place of an air chuck on an existing air line.
What's included
- Air gun with preinstalled push-to-connect fitting.
- Rubber air-gun tip, safety nozzle/adapter and extension.
- Tapered inflator, two inflation needles and Presta valve adapter.
- Storage bag.
Important notes and warnings
- Before removing the air gun, switch off the compressor, depress the red lever to release residual pressure, then remove the gun and reinstall the air chuck.
Shipping
A complete shipping quote must be approved before payment where a checkout rate is not available. Canadian orders require a shipping quote.
Manufacturer Warranty
Warranty coverage, duration, exclusions and claim requirements vary by product and manufacturer. Refer to the manufacturer’s written warranty terms before purchase.
See our Warranty Policy or contact sales@bajaracingparts.com for help finding the applicable terms.
Installation notes
- Remove an air chuck and connect the air gun to that airline. Screw the selected tip into the air gun.
- Remove the IJKP-18 Air Down / Air Up Tool before using this accessory kit, as required by its instructions.
Manufacturer Description
This accessory kit connects to Innovative AT Products’ four-tire air systems. It includes a blow gun with a fitted push-connect coupling, rubber tip, safety nozzle/adapter, extension, tapered inflator, two inflation needles, Presta-valve adapter and storage bag.
Detach one air chuck and connect the gun to that airline. Screw the required tip into the gun. If an air-down/air-up tool is fitted, temporary removal may be necessary.
Before disconnecting the gun, switch off the compressor, press the red lever to vent remaining pressure, then remove the gun and reinstall the air chuck.
Share
